Cast Film Moulds

Cast Film Moulds

1.Hangers-style structure.

2.Both sides of the moulds used of ejector and pull screw, the mould lip can be bent to adjust the gap.

3.All sides of the mould plated chromium and used high-strength bolts with 12.9 grade.The heater make of nice stainess can be control heating.

4.Production is 0.015value="1.5" tcsc="0" unitname="mm" w:st="on">-1.5 mm film.

5.Suitable for: PE, PA, PP, PET, ABS, PS etc.

6.Mould width: 400value="3000" tcsc="0" unitname="mm" w:st="on">-3000mm.